Accurate 3D milling and engraving equipment optimized for the machining of the following materials :
. Aluminium
. Brass and alloy
. Synthetic resins
. Plastics and composites
. Wood and by-products
. Soft stones and marble

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Machine specially designed for polishing acrylic and methacrylate parts (PMMA) with a high quality finishing. In the AMI model, its head can be positioned to obtain bevels or angles up to a 60º lean.

This machine operates on the basis of the cyclical travel carried out by the cutter along the working table, once the parts are firmly secured by the independent clamps. These clamps are situated along the table length. They can be used in parts of different heights being worked on the same cut operation.

The AMI model is equipped with an electronic inclination gage to control and adjust the position of the rake angle with a tenth of a degree precision. The angular graduated scale ranges from -5º to +60º.

 

 

 

 

 

 

 

Table-top machine for polishing acrylic and methacrylate (PMMA) parts with a high quality finishing. The table of this model can be positioned to obtain bevels or angles up to a 60º lean.

The working of this model is based on the travel carried out by the part to be polished in front of the cutter. This machine is equipped with a belt-type clamping system which holds the part and keeps it steady against the moving belt.

The AMT model is equipped with an indicator to control and adjust the position of the rake angle on the part to be polished. The scale has an angular adjustment which ranges from -0º to +60º and it has pre-established positions of 15º, ranging from 0º to 60º.
The AMT is the smallest model in all our edge polishers.