home mail

 

 

DIAMOND POLISHING

 

 

pulesana.jpg

Machine specially designed for polishing acrylic and methacrylate parts (PMMA) with a high quality finishing. In the AMI model, its head can be positioned to obtain bevels or angles up to a 60º lean.

This machine operates on the basis of the cyclical travel carried out by the cutter along the working table, once the parts are firmly secured by the independent clamps. These clamps are situated along the table length. They can be used in parts of different heights being worked on the same cut operation.

The AMI model is equipped with an electronic inclination gage to control and adjust the position of the rake angle with a tenth of a degree precision. The angular graduated scale ranges from -5º to +60º.


 Technical specifications :

  • Working length: 2000 mm
  • Maximum thickness: 100 mm
  • Cut depth: 0,05 - 4 mm
  • Feed speed: 0,5 - 1,1 m/min
  • Standard number of clamps: 5 / 7
  • Milling angles range: from -5º to +60º
  • Part length programming: standard equipment

 

 

AMT.jpgTable-top machine for polishing acrylic and methacrylate (PMMA) parts with a high quality finishing. The table of this model can be positioned to obtain bevels or angles up to a 60º lean.

The working of this model is based on the travel carried out by the part to be polished in front of the cutter. This machine is equipped with a belt-type clamping system which holds the part and keeps it steady against the moving belt.

The AMT model is equipped with an indicator to control and adjust the position of the rake angle on the part to be polished. The scale has an angular adjustment which ranges from -0º to +60º and it has pre-established positions of 15º, ranging from 0º to 60º.

The AMT is the smallest model in all our edge polishers.


T
echnical specifications :

 

  • Table working length: 700 mm
  • Automatic feeding
  • Fastening of the part by means of a clamp
  • Maximum thickness: 35 mm
  • Tool diameter: 83 mm
  • Cut depth: 0,5 mm
  • Feed speed: from 0 to 0,350 m/min
  • Minimum / maximum inclination: from -3º to +60º
  • Milling angles: 15º 22,5º 30º 45º and 60º

 

2_1.jpg1.jpg4.jpg3.jpg6.jpg5.jpg

Copyright © 2005-2008 Angārs SIA. All Rights Reserved